How would you secure a safe to a wall in your house? In most cases, you’re going to use lag bolts to secure it into studs. The floor can also be secured with them.
A fire axe doesn’t take much work to break into a safe if there is enough horizontal space on either side when bolted to the wall. In fact, if there is room to swing, you can use it to break into the safe.
For this week, I have this on my list of projects. I plan to mount it in the corner of a drywall-over-stick-framed room. The plan is…
- Make sure the baseboards sit flush in the corners.
- Identify the studs with a drill and screw the frame to the studs.
- In order to screw the piece into the floor, drill a hole through the bottom.
The bolts and washers should be dropped through the bottom and then secured from underneath by washers and nuts. A would-be thief would have a much harder time ripping it out.
As for crawling into the spider sanctuary, I’m still not sure if I want to attempt that.The bottom of most gun safes has little anchor holes. By doing this, a safe can be bolted down easily and securely to the floor.
The problem, however, is that some people can’t rent homes or apartments, particularly those with floors that aren’t able to be cut. Gun safes can be mounted on the wall by this group of people.
It is only possible to mount a safe to a wall if the safe does not have a fire rating. In order to install these safes, you need to drill two holes near the top of the safe, and space so that they fit into the wall studs and take wood anchors and insert them into the wall studs.
Why Should You Mount a Gun Safe To The Wall?
There are millions of gun owners in the United States and around the world. It is crucial that these powerful weapons are secure since they are used for many purposes, including personal safety, work, hunting.
All the time, accidents involving guns occur due to their not being secure or out of reach. A safe is the best place to store a gun.
Mounting a gun safe on a wall prevents children from using it or allows you to access it easily. Gun safes can be easily mounted to a wall if they are properly anchored and have heavy bolts. Safes of this type tend to be smaller and lighter.
This article will guide you through the process of safely mounting a gun safe to a wall so that you are confident in your technique and effectiveness. Safe placement and mounting strategies should be followed, along with alternative mounting locations.
How to Mount a Gun Safe To The Wall
Depending on the size and number of guns an individual owns, gun safes can weigh anything from 25 pounds to 500 pounds. The placement of your safe has to meet the needs of its secure placement, so you can’t mount a 500-pound safe to the wall without a solid foundation.
The location of your gun safe, along with its dimensions and weight, are important factors to consider when mounting your gun safe to a wall. When it comes to safely mount your firearms, knowing these things is important.
If the right precautions and procedures are followed, mounting a gun safe on a wall is fairly straightforward. Mounting gun safes on walls isn’t the most popular option, especially if the safe is heavy, but it is a viable choice for some homeowners.
The Best Materials For a Wall Mounted Gun Safe
It is important to choose the right materials for wall-mounted safes so that it is properly installed. Physically mounting the safe involves mounting it on a surface and constructing the safe from materials. The following materials should be considered:
- Tools And Hardware
For drilling a screw or bolt hole, you will primarily use a power drill. There may be times when you will need to drill a hole in cement or other materials, as screws and bolts are incapable of penetrating the material.
With proper mounting, you can make your power drill more efficient and secure. The two most common methods of securing objects are screws and bolts. There is no need to support screws when they are screwed into items.
Fasteners need to be fastened on both sides of bolts. Since no other side can be used to secure a drill into a wall, this method is less viable in this case.
To mount the safe completely, you will usually need a wrench, power drill, or screwdriver. In other words, power tools are not required for proper mounting screws to a safe, but a suitable wrench or even another screw is necessary to turn it snugly into place.
- Wall Type
Cement is the best material for mounting a gun safe. In fact, it would be extremely difficult to remove due to its strength. Alternatively, it could be plain cement or brick. It prevents burglaries almost perfectly.
There are many people whose houses do not have concrete walls. This is why they are often mounted to wood and drywall that are standardly built.
Drywall does not provide a secure mounting surface. In a typical wall home setting, finding the board in the wall will ensure maximum security.
Mount a Gun Safe To The Wall: Step by Step
For some people, setting up the safe might be just too difficult and they’ll end up leaving it on the floor. Nevertheless, this might turn out to be a big mistake!
Consider the fact that you are storing a large number of valuables and firearms all in one safe. Large, easily recognizable safes are common.
How can a safe be broken into the easiest way? It could be tipped over and pried open or removed from the house and accessed.
The anchoring of your safe will make these two things far more difficult, so criminals will be far less likely to get their hands on firearms and your valuables.
- Step 1: Finding a Secure Location
It is important to find a safe location that cannot be easily found or accessed for any car gun safe. Among the hazards of gun safes, thieves and children pose the greatest risk for firearm accidents.
It is extremely dangerous to keep a gun within reach of children since they may think that it is a toy. There have been numerous home accidents that resulted from children entering safes and handling unsecured guns.
Second, guns can be easily stolen if they are not locked up securely. It is not uncommon for criminals to steal the entire under-bed gun safe from a home. Attempting to break into the safe will be attempted in the future when they have more time and better tools.
It is possible for these thieves to kill or severely injure people inside your home if their guns are not secure. If you do not contain these weapons safely, you are essentially arming them.
You should consider your living situation and lifestyle when choosing a secure place. The best way to secure a handgun safe to a wall in your living room is probably not. This location is not ideal or safe because of the heavy foot traffic and the fact that the safes are not very subtle. Ideally, you should place a safe in an area that is:
- Is hidden
- Away from children’s reach
- Most people don’t usually go there or have access to it
- Humidity-free and dry environments
- You are the only one who can access it
Picking the perfect location requires consideration of these factors. Since you never know who might find out about your gun collection, you shouldn’t advertise it. By not realizing it, you could make yourself a target of crime.
Preventing thefts and accidents by concealing weapons is the best way to protect them.
It is also important to keep gun safes in a dry environment. Safes and their contents can be damaged by moisture. Keep your safe away from humid areas to prevent this. For safes, dehumidifiers are sold if this isn’t possible.
- Step 2: Choosing A Good Wall
Safes cannot be mounted to any wall within your home. The textures and materials of different walls differ. The wall you choose for the safe should be able to support the weight and cannot be easily removed.
An effective wall safe should be mounted on the studs. Stumps are boards used in the construction of the wall to provide strength and structure. The shelves are usually evenly spaced and connected with drywall, which isn’t as sturdy as concrete.
It will be most secure if the brackets are attached to the studs. The safe may not be secured securely to the wall, or it might be stolen by someone ripping it off. Stud finders are the best tool to use when attempting to determine where studs are located in the wall.
The device calculates the different densities inside the wall using a computer. Your safe will be properly installed if you have this.
Stud finders aren’t necessary; there are always other ways to identify studs. The hollowness of the wall and the material of the wall can be heard if people tap on them. In the past, this method has proven unsuccessful in some cases.
The construction of houses is usually based on the same principles and methods. The dimensions of student boards are usually 2×4 or 2×6, so you can use easy math to figure out where they are.
Usually, the distance between the boards is between 16 and 24 inches. These simple calculations can be used to locate the studs in the desired safe location once you identify where one stud is located. A stud can be found by starting from the corner or looking for an outlet in a room.
- Step 3: Picking The Right Safe
Safes designed specifically for wall mounting are available. If there are mounting holes, you will know this. Many safes have only one or two mounting holes on their bottom, indicating their intended use as floor safes.
So that it can be properly secured off the ground, a wall safe will have mounting holes on the sides.Safes mounted to walls must also be the appropriate weight to prevent them from falling off or posing a safety threat. Weight issues can also be eliminated if sizes are available.
In-wall safes are the most popular wall-mounted safes. For this, you will need to remove drywall up to the safe’s dimensions and insert it into the wall.
It allows for absolute sturdiness to known studs and will keep even with the wall. It is inconspicuous to hang a safe on a wall. However, they are not as convenient as free-standing safes because they are not easily transportable.
- Step 4:Leveling
In order to ensure precision and security, you should level your safe before installing it. The contents inside could be shifted awkwardly if the level position isn’t followed and may rest awkwardly on other items.
This is very easy to learn how to use if you have a level or tool that helps you keep your surface level and helps you determine where to drill holes.
- Step 5: Drilling
To mount the safe, you will need a power drill after finding the studs. So you just need to ensure these are securely and tightly fastened inside the safe since the safe should have its own screws.
Make sure you don’t strip, or shred the drill head with a power drill, as you won’t be able to properly secure the hole afterward.
A further concern is that the effectiveness of a screw may be compromised if it is over-screwed or driven too deep. Because of this, washers and large screws are used. As a result, the screw will not be able to continue through the wall.
Bolting every safe to the wall will damage it since you will end up damaging your safe. If, on the other hand, the safes can be bolted to the wall with some modification, then it can be a great way to have a safe, stay safe, and not permanently damage your property.